WEMIX3.0
Search…
App Wallet

Terms of Use

Before using the WEMIX App Wallet service, the user must agree to the service usage guide. Confirm the agreement to the service usage guidelines in order to continue the service and click [Start].

Account creation and recovery

Users can use the WEMIX App Wallet service to create and restore the WEMIX account.
Users can click the Start Service button to register a new account and the Recovery button to restore the account.

Start Service

Click the service start button to display the password registration screen. A user cannot enter more than three digits in the password. Also, if a user makes a mistake in the password five times at the confirmation stage after registering the password, a pop-up message "The password input failed five times. Please re-register the password." Is output, and when a user clicks the confirmation button, the password is displayed again. A user will be taken to the registration screen.
If the password is registered successfully, a screen confirming the created account's private key will be displayed. On this screen, a user can copy the clipboard so that the user can copy the private key. Click the confirmation button in the pop-up to complete the account registration as usual and move to the token screen.

Recover

Before recovery, the user needs to know the account's private key. Click the recovery button to display the recovery screen for entering the private key. It can be entered directly by the user and supports the paste function. Once a valid private key is entered, the recovery confirmation button will be activated. Click the recovery confirmation button, and the same password registration screen as when starting the service will be displayed, and if the password is successfully registered, the token screen will display.

Coin/Token details

On the token screen, a user can check the amount of coins and service tokens a user has in the wallet account, and a user can add the type of service token he/she needs. Click the coin or service token to move to the detailed information screen, and in the case of coins, click the send button on the token screen to transfer coins. A user can move to the detailed information screen and transfer the token for service tokens.
The screen's icons in the upper right corner are refresh, QR scan, and wallet address.
  • Refresh - Click to recall information about coins and service tokens.
  • QR Scan - Used to scan the QR of an external service.
  • Wallet address - Indicates the address that corresponds to the user account. On the wallet address screen, you can check the QR code and overtext of the address.

Register Token

Clicking Add Token on the Tokens screen activates a pop-up window for adding a service token. Enter the token contract address to add a service token and click the Confirm Address button. The OK button will be activated if the address verification is successful after entering the token contract address. The name and symbol are displayed with the default value of the token contract address and can be changed to the name and symbol desired by the user.

Coin/Token details

Users can check the coin quantity and transaction history on the coin details screen. Users can transfer coins by clicking the send button on the screen where coin information is displayed. A list of coin transfers is displayed in the transaction history, and coin fees incurred during tokens and NFT transfers are also displayed. Users can see the details of the transaction history corresponding to the wallet address in Explorer by clicking "View in Explorer'' on the right side of the transaction history to check the transaction details corresponding to the wallet address in Explorer.
On the Token Details screen, you can check the quantity and transaction details of the token. The coin details and functions are the same, and the transaction details list the number of tokens that occurred when transmitted.

Transfer Coin/Token

Users can transfer coins or tokens to the receiving address using coin / token transmission. Users can send coins / tokens in 3 steps, the procedure is as follows.
STEP 1: Transfer Coin/Token
STEP 2: Verify transfer
STEP 3: View transaction

STEP 1: Send coins/tokens

The coin/token transmission screen supports QR address scanning and addresses pasting functions for entering the receiving address. If users enter more than the coin/token quantity he/she has, the maximum quantity will be entered. Withdrawal notes before clicking the OK button Confirmation check is required, and if the user does not check it, he/she will not be able to send.

STEP 2: Confirm withdrawal

The withdrawal confirmation screen is the final step before withdrawal, and clicking the confirmation button will take the user to the password confirmation screen.

STEP 3: Breakdown of withdrawal details

The withdrawal details screen will be displayed if the password is successfully confirmed. This screen shows transactions, receiving addresses, withdrawal quantities, and fees on the blockchain. If the users want to reconfirm the withdrawal details, the users can check it in the transaction history on the coin / token details screen.

NFT details

On the NFT screen, the NFT held in the account can be checked, and each NFT list that can be collected can be checked on one screen. Click the NFT image to go to the NFT Details screen.
The icon on the upper right of the screen is NFT addition, wallet address.
  • Adding NFTs - WEMIX App Wallet enters information about NFTs directly and recalls the entered information directly from the smart contract. Therefore, even if the NFT held in the account exists, it will not be displayed on the NFT screen unless the user adds it.
  • Wallet address - The wallet address indicates the address that corresponds to the account. The QR code and text for the address can be checked on the wallet address screen.

Add NFT

Click the "+" icon in the upper right corner of the NFT screen to activate the pop-up window for adding an NFT. To add an NFT, enter the NFT contract address and Token ID.

NFT details

On the NFT detailed information screen, a thumbnail image and chain information for the NFT may be checked. NFT transmission is possible by clicking the Send button at the bottom.

Transfer NFT

NFT transmission to the receiving address is possible using NFT transmission. It is possible to send NFT with two STEPs, and the procedure is as follows.
STEP 1: Transfer NFT
STEP 2: View NFT transfer record

STEP 1: Transfer NFT

The Send NFT screen supports QR address scanning and addresses pasting functions for entering incoming addresses. A reminder check is required before clicking the confirmation button; sending is not possible if not checked.

STEP 2: View NFT transfer record

The NFT Send Confirmation screen is the final step before sending NFT, and the confirmation of withdrawal information must be checked. When the OK button is clicked, NFT will be sent after confirming the password.

Run by External Call

Call the WEMIX app wallet from an external app. When calling, there are wallet connection requests, coin transfer requests, token transfer requests, NFT transfer requests, and contract execution requests, in which case WEMIX App Wallet is forcibly executed.

Request Wallet Connection

In the case of a wallet connection request, the target and time to be called can be checked, and if it is executed, the wallet connection completion screen is displayed. If the wallet connection request is not valid or entered an incorrect password five times, the wallet connection failure screen will be displayed.

Request Coin transfer

In the case of a coin transmission request, it is possible to check the target and time to be called. By checking the execution information, it is possible to check the contract address, withdrawal quantity, and estimated fee to be transmitted. If successful, the Coin Transfer Complete screen will be displayed. If the wallet connection request is not valid or the password is entered incorrectly five times, the Coin Transfer Failure screen will be displayed.

Request Token Transfer

The token transfer request has the same procedure as the coin transfer request. The call target, time, and execution information can be checked similarly. The difference from the coin transfer request is the token to be withdrawn.

Request NFT Transfer

In the case of an NFT transmission request, the target, time, and NFT information to be called can be verified, and the receiving address to be transmitted and the expected fee can be confirmed through the confirmation of execution information. If executed normally, the NFT transmission completion screen is displayed. If the NFT transfer request is not valid or the password is entered incorrectly five times, the Coin Transfer Failure screen will be displayed.

Request Contract Execution

In the case of a contract execution request, the screen configuration is the same as coin transfer, but it is a screen for executing a smart contract on a blockchain that is not for coin transfer purposes.

Settings

On the setting screen, wallet recovery information, password change, terms of use, and version information can be verified.
  • Wallet Recovery Information - Check your account's private key.
  • Change Password - Change the password that is the authentication method for WEMIX App Wallet.
  • Terms of Use - Check the Terms of Service.
  • version information - Check the version of WEMIX App Wallet installed on your mobile.

Wallet Recovery Information

The private key to recover the account can be verified. The password must be checked before entering the screen, and the private key cannot be verified if the passwords do not match: Support Copy to Clipboard for user convenience.

Change Password

When changing the password, check and reset the existing password. Password is any authentication method used in WEMIX App Wallet. Password authentication is required even when checking the private key, so please be careful about setting the password.

Terms of Use

Check the terms and conditions for the WEMIX App Wallet. The terms and conditions include explanation of WEMIX App Wallet and notification of responsibility for key management, token asset storage, management of private keys, approval means, information management, recovery, wallet, asset sending/receiving, company obligations, and user obligations.

version information

Shows the version of the current app installed on your mobile.
Last modified 3mo ago
Copy link
On this page
Terms of Use
Account creation and recovery
Start Service
Recover
Coin/Token details
Register Token
Coin/Token details
Transfer Coin/Token
STEP 1: Send coins/tokens
STEP 2: Confirm withdrawal
STEP 3: Breakdown of withdrawal details
NFT details
Add NFT
NFT details
Transfer NFT
STEP 1: Transfer NFT
STEP 2: View NFT transfer record
Run by External Call
Request Wallet Connection
Request Coin transfer
Request Token Transfer
Request NFT Transfer
Request Contract Execution
Settings
Wallet Recovery Information
Change Password
Terms of Use
version information