App Wallet
This page is about the WEMIX App Wallet and the Web Wallet services.
Last updated
This page is about the WEMIX App Wallet and the Web Wallet services.
Last updated
Provides detailed instructions on how to configure and use the App Wallet screen.
App Wallet is equipped with a function to create a wallet account on the user's mobile device to transfer and exchange tokens. Major functions are as follows: support token management and transfer, exchange between tokens, transaction history confirmation, connection with WEMIX service, and contract execution requests. App Wallet can recover your wallet account with a secret(mnemonic) phrase, and only you can check and manage the secret phrase, so keep it in a safe place and never share it with others.
When starting the WEMIX Wallet service for the first time, you can create and restore a wallet accounts.
When you select the [Create new wallet] button, you can create a new wallet account. If you select the [Restore existing wallet] button, you can restore the wallet account you created previously.
If you do not agree to the Terms of Use, you cannot create a wallet.
After agreeing to the terms and conditions, you will proceed to the password registration, and passwords with more than 3 of the same digits cannot be used.
After finishing with the password registration, there is an additional option to add biometric authentications (Face ID, Touch ID). If you have registered for biometric authentication, you can use your device's biometric authentication instead of your password for in-app authentication.
If the password was successfully registered, a screen to confirm the secret phrase of the created wallet will be provided. On this screen, the clipboard copy function is supported so that the secret phrase can be copied, and the procedure to check whether the secret phrase is well-kept will be carried out. If you do not select a word that matches the order of the secret phrase during the passphrase verification, wallet creation will not be completed, so make sure to keep the secret phrase safe before proceeding with the process. When the passphrase verification is complete, a new wallet will be created and you will be taken to the app's home (Balance) screen.
Prior to recovery, users must know the secret phrase of the wallet they want to recover.
After agreeing to the terms and selecting the [Restore existing wallet] button, a screen for entering a secret phrase is provided. The secret phrase can be entered directly by the user or written through the paste function.
After entering a valid passphrase, you will be able to register a new password and set whether to use biometric authentication. After completing the process, the wallet recovery process is complete.
In the [Balance] screen, the wallet account address and price information for all coins/tokens in the upper area are shown in WEMIX$, a stable coin of the WEMIX ecosystem pegged to the USD.
For wallet addresses, they are automatically copied to the clipboard when selected.
In the area at the bottom of the screen, you can check the amount of coins/tokens you have, and in the case of a coin that you would like to check the price of, WEMIX$ conversion price and 24-hour price information is provided. You can also add the type of service token if you need.
The icon on the top right of the screen is [QR Scan, Notification, Settings].
QR Scan – Used to scan the QR code of another wallet or the QR code of WEMIX service.
Notice - You can check the notices and usage guide related to the WEMIX Wallet service.
Settings - You can check the security settings for the app, the inquiry board, and the terms of use.
If you select a coin/token you have, you will be taken to the detailed screen, and you can check various information such as price graphs, news, token information, and transaction history depending on the selected coin/token.
It is also possible to send the corresponding coin/token by selecting the [Send] button on the detailed screen.
Clicking Add Token on the [Balance] screen activates a pop-up window for adding a service token. You can change the token/coin display and order displayed on the [Balance] screen.
You can send coins/tokens to the destination address using the Send Coins/Tokens function. This process takes 6 STEPs, and the procedure is as follows.
STEP 1: Enter the destination to send
STEP 2: Select the token to send (If you select the [Send] button on the token detail screen, skip this step)
STEP 3: Enter the amount to be sent
STEP 4: Check the send information
STEP 5: Proceed with a password or biometric authentication
STEP 6: Send complete
The send destination input screen supports QR code scanning and addresses paste functions to enter the destination address. You can also select a list of recently sent wallet addresses and enter it as the destination address.
Enter the amount of tokens to send. When entering the token amount, the WEMIX$ conversion price corresponding to the entered amount is shown. If you wish, you can also enter based on WEMIX$, and when you input WEMIX$, the token amount corresponding to the entered amount will be converted and shown.
If you select the [Max] button, the total amount of tokens you hold is automatically entered.
After input, information about the expected fee according to the amount is provided, and if there is not enough WEMIX to pay the fee, the token cannot be sent.
Before the final send process, you can check the amount of tokens to be transferred, the receiving address, and the information on the estimated fee (gas fee).
Complete the password confirmation or biometric authentication to continue.
When the transfer is complete, you can check the amount of tokens sent, the receiving address, and the confirmed fee (gas fee). If you wish, you can access the Explorer to check the details of the completed transaction.
On the [Exchange] screen, you can swap tokens between WEMIX and WEMIX$. The process takes 5 STEPs, and the procedure is as follows.
STEP 1: Set up the tokens to swap
STEP 2: Enter the amount to be swap
STEP 3: Check the exchange information
STEP 4: Proceed with a password or biometric authentication
STEP 5: Swap completed
Set the tokens in which you would like to swap by changing the input and output tokens for WEMIX, WEMIX$.
After setup, you can enter the amount of tokens to be swapped. When entering the amount to input, the output amount corresponding to the entered amount is also displayed. If desired, you can enter the amount of tokens you want to receive, and once entered, the amount to input corresponding to the entered amount is displayed.
If the [Maximum] button is selected, the total number of tokens held is automatically entered.
Before the final step, check the amount of tokens to be swapped and its expected fee information. Estimated fees include transaction fees and gas fees. The default settings for slippage is set to 0.1~0.2%.
Token swap occurs when password or biometric authentication is complete.
When the swap is complete, you can check the amount of tokens swapped and total fees, and if you wish, you can access the Explorer to view the details of the completed transaction.
On the [History] screen, you can check the entire transaction history made in WEMIX Wallet in the order of recent events. When you select the list, you can check the details of the transaction. If you want, you can access the Explorer and check the details of the completed transaction.
On the NFT screen, the NFT held in the account can be checked, and NFT collection can be checked on one screen. Click the NFT image to go to the NFT Details screen.
You can send NFT to the destination address using the Send NFT function. It is possible to send NFT in 4 STEPs, and the procedure is as follows.
STEP 1: Enter the destination to send
STEP 2: Check the send information
STEP 3: Proceed with a password or biometric authentication
STEP 4: Send complete
The send destination input screen supports QR code scanning and addresses paste functions to enter the destination address. You can also select a list of recently sent wallet addresses and enter it as the destination address.
Before sending, you can check the NFT to be finally transferred, the receiving address, and the estimated fee (gas fee) information.
NFT transfer proceeds when password or biometric authentication is in progress.
When the transfer is complete, you can check the NFT sent, the receiving address, and the confirmed fee (gas fee). If you wish, you can access the Explorer to check the details of the completed transaction.
If a contract execution request occurs due to connecting the wallet to NILE or WEMIX.Fi, the execution and approval of the WEMIX Wallet app is required.
When transactions with NILE and WEMIX.Fi services are in progress (NFT purchase, service token receipt, governance voting, SWAP, Pool, Staking, etc.), approval of the connected WEMIX Wallet is required. If you run WEMIX Wallet after requesting approval from the service to your wallet, you can check the requested amount, expected fee, requested service, transaction wallet, and contract address information. After checking the information and proceeding with approval in WEMIX Wallet, the transaction of the requested service is finally complete.
On the settings screen, you can check security settings related to the security of the app, make inquiries, terms of use and privacy policy, and app version information.
Security Settings – Set the app authentication method or check the secret phrase and private key information.
Contact Us – Check the FAQ for the app or use it if you need to solve a problem.
Terms of Use - Check the terms of use.
Privacy Policy – Check the Privacy Policy.
Version information - Check the version of the WEMIX Wallet app installed on your mobile.
You can set whether to use biometric authentication or change the registered password. If you change your password, you will be able to reset after confirming the old password. Make sure not to lose the changed password.
In addition, you can set whether the app is auto-locked and the lock time. If the app is kept in the background state during idle use, the app will be locked and the authentication process will be required when calling the app.
You can check the secret phrase and private key of the created wallet. After checking the precautions, you can check it after going through the authentication process. Be sure to record and keep the checked secret phrase and private key in a safe place so that they are not leaked to the outside.
If you select the [Contact Us] menu, you will be directed to the Support Center, and you can find general information about WEMIX Wallet through FAQ. Please refer to the instructions on how to contact the support team in case of any problems.
Check the Terms of Use and Privacy Policy for WEMIX Wallet.
Displays the current app version installed on your mobile.
Select the token you want to send from the list of all tokens you have.
